APF series products adopt the controller which uses the most advanced digital signal processor. It uses IGBT semiconductors as switching devices and the industry-advanced three-level topology to get the best compensation effect.
Main Function and Feature
1. Controlling Reactive Power
*To reduce user's own electricity expenses.
*To ensure that the power factor reaches the standard, avoiding the power rate electric bill penalty caused by the low power factor.
*To reduce line loss and voltage drop.
*To improve the actual capacity of transformers and generators.
2. Controlling Harmonics
*To improve the quality of power supply, to improve the operation reliability of equipment and to reduce the economic losses caused by equipment misoperation.
*To reduce line heating, to reduce insulation aging and to improve electricity safety and reliability.
*To reduce the resonance probability of the compensation capacitor, and to improve the electricity safety and reliability.
*To reduce the electromagnetic interference caused by harmonics and to ensure the normal operation of the communication system.
*To meet the requirements of various standards.
3. Controlling Three-phase Imbalance
*To avoid the risk of heating and aging neutral line, which can lead to fire accidents.
*To avoid equipment false alarm caused by partial voltage imbalance.
*To avoid the risk that the weak current equipment in the control system will burn down due to the high zero ground voltage.
4. Controlling Voltage Deviation
* To avoid damage to equipment caused by too high or too low voltage.
Technical Specifications
Model introduction
Product appearance and mounting dimension
Chip Mounter Workshop
Typical Example
Main Function and Feature
1. Controlling Reactive Power
*To reduce user's own electricity expenses.
*To ensure that the power factor reaches the standard, avoiding the power rate electric bill penalty caused by the low power factor.
*To reduce line loss and voltage drop.
*To improve the actual capacity of transformers and generators.
2. Controlling Harmonics
*To improve the quality of power supply, to improve the operation reliability of equipment and to reduce the economic losses caused by equipment misoperation.
*To reduce line heating, to reduce insulation aging and to improve electricity safety and reliability.
*To reduce the resonance probability of the compensation capacitor, and to improve the electricity safety and reliability.
*To reduce the electromagnetic interference caused by harmonics and to ensure the normal operation of the communication system.
*To meet the requirements of various standards.
3. Controlling Three-phase Imbalance
*To avoid the risk of heating and aging neutral line, which can lead to fire accidents.
*To avoid equipment false alarm caused by partial voltage imbalance.
*To avoid the risk that the weak current equipment in the control system will burn down due to the high zero ground voltage.
4. Controlling Voltage Deviation
* To avoid damage to equipment caused by too high or too low voltage.
Technical Specifications
| Project | Project Description | |
| Electrical Specifications | Input line voltage | 380V ±15% |
| Phase | 3-phase 4-wire; 3-phase 3-wire | |
| Frequency | 50/60±5Hz(can be set) | |
| Compensation current(each phase) | 30A~150A(according to model) | |
| Filtering harmonic degree | 2~50 orders | |
| Power factor correction | -1 to 1 adjustable | |
| Limited current | Rated current output | |
| Parallel operation | Up to 8 modules inparallel | |
| Module power consumption | <2kW | |
| Effectiveness | Up to 97.5% | |
| CT ratio range | 150:5~6000:5 | |
| Communication Interface | Dry contact | 1EPO |
| Communication | RS485 | |
| Environmental Specifications | Place of use | Indoor, free from direct sunlight, no dust, corrosive, flammable gases, oil mist, water vapor, dripping or salt, etc. |
| Working elevation | Below 1000 meters and derating used above 1000 meters | |
| Storage temperature | -20ºC ~ +70ºC | |
| Operating temperature | -10ºC ~ +40ºC | |
| Humidity | Less than 95% RH, anhydrous beads condensation | |
| Vibration | Less than 5.9 m / s2 (0.6 g) | |
| Structure | Protection level | IP20 |
| Colour | 7035 gray white / black (can be customized) | |
| Size | Depending on the model | |
| Net weight | 20kg/36kg/50kg(according to model) | |
| Cooling method | Intelligent air cooling | |
Model introduction
Product appearance and mounting dimension
Rack-mounted APF Outline Drawing
Wall-mounted APF Outline Drawing
APF Dimensions Table| Size (mm) | Rack-mounted type | Wall-mounted type | ||||
| 30A 50A | 75A 100A | 150A | 30A 50A | 75A 100A | 150A | |
| A | 359 | 484 | 554 | 521.5 | 611 | 621 |
| B | 341 | 466 | 536 | 500 | 575 | 585 |
| C | 315 | 440 | 510 | 300 | 300 | 300 |
| D | 200 | 232 | 250 | 120.5 | 137.5 | 142.5 |
| E | 89 | 89 | 89 | 379 | 500 | 570 |
| F | 55.5 | 71.5 | 80.5 | 350 | 475 | 545 |
| G | 556.5 | 646 | 656 | 315 | 440 | 510 |
| H | 500 | 575 | 585 | 200 | 232 | 250 |
| K | 35 | 35 | 35 | - | - | - |
Chip Mounter Workshop
Typical Example
Thank you very much for browsing our products. Our excellent products and services will satisfy you.
If you have any questions, please contact us.
Company Name: ZHEJIANG YIDE TECHNOLOGY CO., LTD.
Telephone: 86-577-57105861
Website: http://zjydtech.en.made-in-china.com/en
Address: No. 51 Wenxiu Road, Pu Zhou Street, Longwan District, Wenzhou, Zhejiang, China
If you have any questions, please contact us.
Company Name: ZHEJIANG YIDE TECHNOLOGY CO., LTD.
Telephone: 86-577-57105861
Website: http://zjydtech.en.made-in-china.com/en
Address: No. 51 Wenxiu Road, Pu Zhou Street, Longwan District, Wenzhou, Zhejiang, China